Â鶹¹û¶³´«Ã½

Features

• TAA Compliant
• 10-Gigabit Symmetrical Passive Optical Network (ITU G.9807.1 XGS-PON)
• Economical one-to-one closet-based legacy switch replacement
• Reuse the last 100m CATx cables in the horizontal, walls and drops
• Achieve lower IT support and maintenance costs
• Remove points of known network vulnerabilities
• Reduce fiber cabling building-to-building and floor-to-floor
  Gain extended temperature range inside IT equipment rooms
• Support IoT, smart buildings, Wi-Fi, digital ceiling and LED lighting
• Migrate to deep fiber design or combining with deep fiber

Features

Software Defined Technology Today

All features and functionality can be defined in software and dynamically allocated, based on real-time needs. Being controlled by the Â鶹¹û¶³´«Ã½ Panorama PON Manager helps speed installations and daily operations. Centrally controlled by the Panorama PON Manager, the Â鶹¹û¶³´«Ã½ ONT224 supports auto-discovery mechanisms, can be quickly provisioned using global templates and profiles, and offers smart troubleshooting tools, all of which allow for speedy moves, adds and changes for everyday operations. Â鶹¹û¶³´«Ã½ ONT224 is hardware future ready for open-source and standards-based software defined networking.

Collapse and Converge over Fiber

The Â鶹¹û¶³´«Ã½ ONT224 is ideal for converging IoT, digital ceiling, smart building, and wireless powered devices over the limitless capacity of a fiber-based infrastructure. This closet-based ONT also results in fewer fiber cabling because multiple bidirectional wavelengths on single fiber reduce cabling. For powered device connectivity using Power over Ethernet (PoE), IEEE 802.3af PoE, PoE+ IEEE 802.3at (Class-4 negotiations) and IEEE 802.3bt (4PPOE) can be selected. The ONT can support all 24-ports of 4PPoE supporting 802.3af/at/bt and all 24-ports supplying 60 watts per port.

Advanced IP and Ethernet     

Â鶹¹û¶³´«Ã½ ONT224 offers industry-leading software-defined traffic management, security, provisioning and quality of service mechanisms. It supports enterprise VoIP connectivity with the latest unified communications systems and all enterprise IP-based video traffic (e.g., entertainment, surveillance, conferencing). Â鶹¹û¶³´«Ã½ FlexSym Series enterprise focused means that advanced Ethernet IEEE features, such bridging, VLAN, ACL, PoE, LLDP, NAC, 802.1x, IP digital audio (Dante, CobraNet) and other must-have protocols are supported that satisfy true enterprise requirements.

Reduce Network Vulnerability Points   

This one-to-one closet-based switch replacement take advantage of OLAN’s more secure design with fewer network points of vulnerability and reduced IP addresses to management. Â鶹¹û¶³´«Ã½ FlexSym ONT224 also supports industry leading bi-directional AES-128 encryption with 60 second churning of keys. Centralized intelligence and management means fewer human touches, which directly results in the best possible network access controls.

Specifications

Physical

• Weight: 16.9 lb / 7.66 kg
• Depth: 17.6 in / 447 mm
• Width: 17.3 in / 439 mm
• Height: 1.7 in / 43 mm

Interfaces

• RJ-45 / Gigabit Ethernet w/PoE: 24
• SC-APC XGS-PON (G.9807) uplink: 1

Power

• Single or dual AC power inputs
• Allows hot replacement of power modules
• Power modules are purchased separately
• Max Draw with No PoE: 71 Watts 
• Max Draw with Full PoE: 1090 Watts

Power over Ethernet (PoE)

• 615W of PoE with one 715W power supply, or equipped with two modules in redundant configuration
• 1000W of PoE with one 1100W power supply, or equipped with two modules in redundant configuration
• 1330W of PoE with two 715W power supplies in non-redundant configuration
• 2100W of PoE with two 1100W power supplies in non-redundant configuration
• 802.3af/at, class 0-4, up to 30W per port on all 24-ports
• Cisco UPoE Support with up to 60W on all 24-ports

Passive Optical Network

• 9.95328 Gbps burst mode upstream
• 4-9dBm launch power, -28 dBm sensitivity and -9 dBm overload
• Laser compliant FCC 47 CFR Part 15
• Class B and FDA 21 CFR 1040.10 and 1040.11, Class 
• Wavelengths: Downstream 1580 nm, Upstream 1280 nm
• 9.95328 Gbps downstream receive
• ITU-T G.984.2 Amd1 Class B+
• APD receiver and DFB transmitter
• Flexible mapping of GEM ports and TCONT with priority queue-based scheduling
• Activation with automatically discovered Serial Number (SN) and password
• Bi-directional AES-128 encryption with 60 second churning of keys
• Forward Error Correction (FEC)
• IP DSCP to 802.1p mapping
• Support for multicast GEM port
• Compliant with ITU-T G.9807.1 (physical layer), G.987 (.2/.3/.4) and G.988.1 standards
• SFF-type laser SC/APC connector

IP/Ethernet

• 1024 MAC addresses
• Supports Dante and CobraNet digital audio systems over IP
• Link Layer Data Protocol (LLDP) for autoprovisioning, inventory and PoE power management.
• Jumbo frames of up to 9K
• 10/100/1000BT
• IEEE 802.1x Port-Based Authentication/MAB
• Network Access Control (NAC)
• Virtual switch based on 802.1Q VLAN
• 25 VLANs per Ethernet port
• VLAN tagging/detagging, marking/remarking per Ethernet port
• VLAN translation, trunking and stacking
• QoS and security policies based on VLAN-ID, 802.1p, DSCP
• MAC address limiting to prevent flooding attacks and limiting the number of devices attached to a port
• IPv6 capable for enterprise services
• L2-L4 Access Control Lists (ACLs)
• Upstream ACL rate limiting
• IGMP v2/v3 snooping
• VLAN trunking and stacking

Operations, Administration and Maintenance (OAM)

• Alarming, events and performance monitoring
• Complete service provisioning, such as Ethernet and VoIP
• Remote image download over OMCI as well as activation and rebooting
• Holds two versions of software with image integrity checking and automatic rollback
• Standards-compliant OMCI as defined in ITU-T G.988
• Management Information Base (MIB) manipulation over OMCI by Create, Delete, Set, Get & Get Next commands

Alarm / Monitor / Test

• ONT LAN-LOS (Ethernet port alarm on LAN side)
• ONT Dying Gasp (Power Loss)
• Software Version Mismatch / Download Failure
• ONT BER Maintenance
• ONT RDI (RDI Indication from ONT)
• ONT REI (REI Remote Error Indication from ONT)
• ONT LOPL-SF
• ONT LOPL-LOA (Loss of Acknowledge)
• ONT LOPL-OAML (LOPL-LOAM)

Environmental

• Supports redundant and replaceable fans
• Altitude: Up to 10,000 feet
• Relative Humidity: 5–95% noncondensing
• Temperature with 715W power supply: -5°C / +23°F to +50°C / +122°F
• Temperature with 1100W power supply: -5°C / +23°F to +40°C / +104°F

Compliance

• FCC
• CE
• UL
• TAA

LED Indicators

• PON — Link status
• Ethernet link/Activity (per port)
• Ethernet Speed (per port)
• FAN – status

Management

• Â鶹¹û¶³´«Ã½ Panorama PON Manager
• ONT has no local management access

Software Support

• Minimum base software SR31.5 and higher

Installations

• Mounting: 19" and 23" rack mounted
• OLTs supported: OLT1, OLT2, OLT6, OLT-mini, OLT1150, OLT1150E, OLT1134AC, OLT1131

Ordering Information

• ONT224 Part Number: 81.11G-ONT224-T
• 715W POWER SUPPLY Part Number: 81.11P-PW715W
• POWER CORD C13 TO TYPE B US 3FT Part Number: 81.11W-C13TYPB-3
• FlexSym 1100W POWER SUPPLY, C15 CORD REQUIRED: 81.11P-PW1100W
• PWR AC CORD C15 TO TYPE B US 7.5FT: 81.11W_C15TYPB

³Ò±ð²Ô±ð°ù²¹±ôÌý

The development, release, and timing of features or functionality described for Â鶹¹û¶³´«Ã½â€™ products remains at Â鶹¹û¶³´«Ã½â€™ sole discretion. The information that is provided within this data sheet is not a commitment nor legal obligation to deliver any material, code or functionality.